Doug Hargreaves

Professor Doug Hargreaves is the Head of the School of Engineering Systems at Queensland University of Technology (QUT), Brisbane, Australia. He is a mechanical engineer having published over 100 refereed papers on Tribology (friction, wear and lubrication) and in excess of 30 papers on engineering education. He is a former President of Engineers Australia (Qld) and secretary of the Australian Association of Engineering Education (AaeE). He is currently the Queensland Chapter Chair of CELM. He has served on many EA committees over a long period of time including the Board of the College of Mechanical Engineers and National Congress. Since becoming Head of School he has developed and implemented a model of leadership that is referred to as Values Driven Leadership.

 

Qualifications

• BE(Mech), Qld Institute of Technology (now QUT)
• MSc(Tribology), University of Leeds, UK
• PhD(Tribology), University of Leeds, UK

 

Career History and Biography

Professional and Group Associations

• Engineering Executive, Engineers Australia (EngExec)
• Fellow, Engineers Australia, (FIEAust, CPEng)
• Registered Professional Engineer of Queensland (RPEQ)
• National Professional Engineer Register (NPER)

 

Member:

• The Institution of Mechanical Engineers, (MIMechE)
• Australian Society of Sugar Cane Technologists, (MASSCT)
• Society of Tribologists and Lubrication Engineers, (MSTLE)
• Australasian Association for Engineering Education, (MAAEE)
• Australian Institute of Company Directors, (MAICD)

 

Professional and Community Services Roles

• Chair of Centre for Engineering Leadership and Management (CELM Q) – a part of Engineers Australia Qld Division
• Judge for Engineers Australia Qld Division Engineering Excellence Awards
• Editorial Board of Tribotest (international journal)
• Immediate Past President of Rotary Club of Carindale
• A wide range of community activities through The Salvation Army Carina Corps for example work at the Recovery Centre (addiction to drugs, alcohol, gambling), visitation to hospitals and nursing homes.

Research Areas

Within the broad fields of asset management, and engineering leadership and education, Professor Hargreaves and his research team have defined four main research areas:

• Tribology
• Bearing Design
• Engineering Education
• Values Driven Leadership

 

External Collaborators

Within the broad field of asset management research Professor Doug Hargreaves and his research team has strong collaborations with:

• CIEAM
• CRC for Rail Innovation

Teaching areas

• Tribology
• Fluid Mechanics

Received over $548,000 in research funding since year 2000.

 

Selected List of Awarded Grants

Professor Hargreaves and his research team have been granted funds to conduct the following research projects:

 

Development of Integrated wear-Fatigue-Lubrication Model for assessment of Rail-Wheel degradation and Operational Risks

Chattopadhyay G and Hargreaves DJ

Participant agencies: CRC Rail and CIEAM

Period: 2005/2008

Amount: $130,000 pa (3 years)

 

Development of an integrated model for Benchmarking Rail Wheel Lubrication

Chattopadhyay G and Hargreaves DJ

QUT Visiting Research Fellowship, Dr PO Larsson-Kraik

Amount: $4,000

 

Improving plant reliability and reduction of process cycle time of animal feedstock production

QUT Strategic Links Scheme with Chattopadhyay G and Wang J

Period: 2004

Amount: $7,500

 

Essentials of tribochemistry of synthetic lubricants

QUT Visiting Research Fellowship with Prof Zenon Pawlak

Period: 2004

Amount: $7,000

 

Fundamental study of the use of environmentally sustainable lubricants such as water in multi-axial groove journal bearings

Hargreaves DJ, Brown RJ, Kelson NA and Pai R

ARC/QUT Linkage

Period: 2004

Amount: $2,000

 

Top of Grants Section

 

Prediction of material removal from the conveying pipeline system and optimisation of process parameters for maximum plant life

(With several other researchers)

Office of Commercial Services

Period: 2004-2006

Amount: $7,500 per year

 

Gas Turbine Asset Management

(With several other researchers)

Office of commercial services

Period: 2004-2006

Amount: $22 000 per year

 

Formula SAE-A Competition

Office of Commercial Services

Period: 2004

Amount: $6,000

 

Fundamental study of multi-axial groove journal bearings with particular emphasis on water-based lubrication

ARC/NHMRC

Period: 2004

Amount: $2,000

 

Development of total cost of ownership models for railway assets

QUT Visiting Research Fellowship

U Dinesh Kumar with Dr Gopi Chattopadhyay

Period: 2003

Amount: $4,000

 

Top of Grants Section

 

Development of an efficient, smooth and readily controlled resistance cycling ergometer

With Dr Tim Barker

Period: 2003

Australian Institute of Sport

Amount: $12,000

 

QUT strategic links

Amount: $6,000

 

Modelling of a heavy-duty diesel engine low emission retrofit kit

Participating agencies: AusIndustry R&D , With Rotec Pty Ltd

Graduate Start Program

Amount $5,000

 

Computational Fluid Dynamic (CFD) modelling of turbulent flow in water lubricated journal bearings

QUT Visiting Research Fellowship

Dr R Pai

Amount: $6,250

 

Modelling the dispersion of two-stroke engine emissions in sea water

QUT Post Doctoral Fellowship with Dr Richard Brown

Period : 2000

Amount: $5,000

 

The influence of mold release agents on the surface finish of architectural concrete

Fuchs Lubritech Scholarship

Period: 1999

Amount: $9,600

 

Top of Grants Section

 

Integrating Workplace Learning and Professional Education: Implementing a Student Centred, Objectives driven and outcomes focused framework

QUT T&L Large Grant with W Boles, J Bunker, C Lenz, D Campbell, K Hoffman, Ramasamy-Iyer and K Whelan

Period: 2001 - 2004

Amount: $131,773

 

Using flexible delivery to establish a framework to provide a student capability profile for student in Built Environment and Engineering

QUT T&L Large Grant with M Murray and J Allison

Period: 1998 - 2001

Amount: $201,000

 

Performance evaluation of polyethylene glycol environmentally friendly lubricants

School of Mechanical, Manufacturing and Medical Engineering Seeding Grant

Period: 1998 - 1999

Amount: $9,600

 

Lubrication of Dragline Components

Australian Coal Association Research Program (ACARP) with W. Scott

Period: 1997 - 1998

Amount: $150,000

 

Towards Lifelong learning by addressing the mismatch between lecturer and student conceptions and expectations of learning in mechanical engineering

QUT T&L Development Small Grants Scheme

Period: 1996

Amount: $2,335

 

Top of Grants Section

 

Assessment practices to promote quality learning

QUT T&L Development Small Grants Scheme

Period: 1995

Amount: $4,674

 

Mechanical Engineering and student learning - is all well?

QUT T&L Development Small Grants Scheme with EJ Wallis

Period: 1994

Amount: $4,610

 

The effect of cavitation boundary condition models on predicted automobile piston ring performance

Faculty of Built Environment & Engineering

Period: 1993

Amount: $6,350

 

The implications of different learning approaches of mechanical engineering students on teaching strategies

QUT T&L Development Small Grant Scheme

Period: 1993

Amount: $4,335

 

Lubrication Audit of Draglines

Australian Coal Association Research Program (ACARP) with Prof W. Scott

Period: 1993 - 1995

Amount: $126,000

 

Top of Grants Section

 

The effects of lubricant cavitation on the performance of automobile piston rings with respect to fuel economy and exhaust emission levels

QUT R&D Scheme

Period: 1992

Amount: $12,700

 

The development of a testing technique to assess the performance of non-metallic bearings in a variety of environments

AESIRB

Period: 1992

Amount: $31,384

 

The development of a testing technique to assess the performance of non-metallic bearings in a variety of environments

Australian Electrical Research Board (AERB)

Period: 1990

Amount: $26,500

 

Wear of water lubricated non-metallic journal bearings

AERB

Period:1989

Amount: $1,000

 

Measurement of elastohydrodynamic lubricant film thickness

QIT R&D Scheme

Period: 1989

Amount: $4,000

 

Top of Grants Section

 

Wear of water lubricated non-metallic journal bearings

Australian Electrical Research Board (AERB)

Period: 1988

Amount: $15,000

 

Investigation of lubrication mechanism in high load

Ampol Research and Development Laboratory

Period: 1988

Amount : $1,500

 

Design of solids separation equipment for the Brewing Industry

Bond Brewings

Period: 1987 - 1988

Amount: $23,000

Selected List of Research Student Projects

Professor Hargreave's students have undertaken following funded research projects:

• Teaching
  • Guest Editor of AJEE
  • Monographs
  • Refereed Journals
  • Refereed Conferences
  • Non-Refereed Conference Papers
• Discipline Research
  • Refereed Journals
  • Refereed Conference Papers
  • Invited Presentations
  • Papers Currently Being Reviewed/Accepted for Journal or Conference Publication
  • Internal and/or Confidential Reports
  • Guest Editorships of Journals
  • Non-Refereed Conference/Magazine Papers
• Peer Reviewer for Papers

 

Teaching

Guest Editor of Australasian Journal of Engineering Education (AJEE)

• Together with Dr I McDonald of Swinburne University of Technology, Professor Hargreaves edited a special edition of AJEE on the topic of “Transition to University”, Vol 9, No 1 (2000)

 

Top of Publications Section

 

Monographs

• HARGREAVES, DJ (1995): "Elastohydrodynamic lubrication in the design of machine elements", QUT Publishers. ISBN 1 86435 035 0
• HARGREAVES, DJ (1994): "Graduate Reflections of the Mechanical Engineering Degree at QUT", School of Mechanical and Manufacturing Engineering. ISBN 1 86435 636 7
• HARGREAVES, DJ (1994): "Graduate and Student Comments on the ME45 degree course", School of Mechanical and Manufacturing Engineering. ISBN 1 86435 637 5

 

Top of Publications Section

 

Refereed Journals

• HARGREAVES, DJ (1998): “Addressing the transition to tertiary education in engineering”, European Journal of Engineering Education, Vol 23, No 1, pp 79-89
• HARGREAVES, DJ (1997): “Student learning and assessment are inextricably linked”, European Journal of Engineering Education, Vol 22, No 4, pp 401-409
• HARGREAVES, DJ (1996): “How undergraduate students learn”, European Journal of Engineering Education, Vol 21, No 4, pp 425-434
• HARGREAVES, DJ (1993): "A Strategy for teaching large classes of engineering undergraduates", Australasian Journal for Engineering Education, Vol 4, No 2, pp 151-157

 

Top of Publications Section

 

Refereed Conferences

• KOSSE V AND HARGREAVES DJ (2006): “Teaching Tribology in Engineering Courses”, AUSTRIB 2006: International Tribology Conference, Brisbane, Australia
• BOLES W and HARGREAVES DJ (2005): “Reflections on Changing the Culture of Engineering Education at QUT”, 16th AaeE conference, Sydney, September
• BOLES W, HARGREAVES DJ and BECK H (2005): “Deploying Bloom’s Taxonomy in a Work Integrated learning Environment”, 16th AaeE conference, Sydney
• MAHALINGA-IYER R, HARGREAVES DJ, LENZ C AND BECK H (2004): “Liaison with Industry in Modelling Work Integrated Learning for Engineering Undergraduates”, 15th AaeE conference, Toowoomba, September
• KOSSE V AND HARGREAVES DJ (2004): “Project-based teaching of mechanical design”, 15th AaeE conference, Toowoomba, September
• KOSSE V AND HARGREAVES DJ (2003): “Role Modelling Teamwork through teaching of mechanical design”, 14th AaeE conference, Melbourne, September, pp 82-90
• ASPLAND T, CREASY S, HARGREAVES DJ AND SMEAL G (2003): “SCOTI – A pathway into the scholarship of teaching, Proc Effective Teaching and Learning Conference, Griffith University, Brisbane
• SMEAL G, KERR C, ASPLAND T, HARGREAVES DJ AND CREASY S (2003): “Blurring the boundaries between academic and general staff”, ATEM Queensland Branch conference
• WALKINGTON J AND HARGREAVES DJ (2001): “Inclusive leadership: an integral component of curriculum change”, Proc SEFI annual conference, Copenhagen, Denmark, September, pp74-75
• HARGREAVES DJ, MURRAY M AND ALLISON J (2001): “Developing a more holistic engineering graduate via a student capability profile”, Proc SEFI annual conference, Copenhagen, Denmark, September, pp 37-38
• HARGREAVES DJ (2001): Integrating workplace experience into an engineering curriculum”, Proc “Effective Teaching and Learning” conference, Brisbane, 12-14 November
• ALLISON J., HARGREAVES D., & MURRAY M., “Developing student capability profiles for Built Environment and Engineering Graduates”, 11th AaeE Conference, 26-29 September, 1999. pp 195-200
• HARGREAVES, DJ (1998): “Promoting understanding through active participation in tutorials and lectures”, 10th AaeE Conference, Gladstone, Sept. pp 75-79
• HARGREAVES, DJ and TERNEL, ID (1997): “The adequacy of evaluating teaching by student ratings and peer observation”, 9th AaeE Conference, Ballarat, Dec, pp 31-35
• HARGREAVES, DJ and TERNEL, ID (1997): “The changing role of the engineering educator”, 9th AaeE Conference, Ballarat, Dec, pp 100-104
• HARGREAVES, DJ (1996): “Curriculum development to prepare graduates for professional life”; SEFI 96 Annual Conference, Educating the engineer for lifelong learning, Vienna, Sept, pp 163-168
• HARGREAVES DJ (1996): “Curriculum development to prepare graduates for professional life.” Proc SEFI Conference, Sept 11-13, Vienna, Austria, pp 163-168
• HARGREAVES, DJ and LISTON, JW (1996): “Motivating first year students by mentoring and by raising awareness of societal pressures on engineers”, SEFI 96 Annual Conference, Educating the engineer for lifelong learning, Vienna, Sept, pp 169-174
• HARGREAVES, DJ and MATHIESON, W (1996): “Engineering and the Community for first year students”. 8th AaeE Conference, Sydney, Dec, pp 243-245
• HARGREAVES, DJ (1996): “Assessment practices need change”. 5th Annual Engineering Management Educators Conference, Sydney, July
• HARGREAVES, DJ and HARGREAVES, MH (1996): “Assessment practices need to change”, 8th AaeE Conference, Sydney, Dec, pp 70-73
• HARGREAVES, DJ and WALLIS, EJ (1995): “Towards a new teaching paradigm - the mismatch between students and lecturers conceptions of learning’, 7th AaeE Conference, Melbourne, Dec, pp 45 - 49
• HARGREAVES, DJ and HARGREAVES, MJ (1995): “Assessment for learning”, 7th AaeE Conference, Melbourne, Dec, pp 131-135
• HARGREAVES, DJ and LISTON, J (1995): “Bewitched, bothered and bewildered: mentoring first year students”, 7th AaeE Conference, Melbourne, Dec, pp 70 - 74
• HARGREAVES, DJ and WALLIS EJ (1994): "How students learn and why they adopt certain learning approaches", 6th AaeE Conf Sydney, Dec, pp 601-606
• BROWN, RF and HARGREAVES, DJ (1993): "A five-question structure to engineer better student reports", 5th AaeE Conference Proceedings, Auckland, December, pp 458-463
• HARGREAVES, DJ and WALLIS, EJ (1993): "The students' approach to learning and its relationship to the learning context", for 5th AaeE Conference Proceedings, Auckland, December, pp 542-547
• HARGREAVES, DJ and WOODRUFFE, R (1992): "Continuing curriculum development of the mechanical engineering degree at QUT", Proc 4th AaeE Conference, Brisbane, December, pp 338-343
• HARGREAVES, DJ (1992): "An innovative approach to the engineering education of overseas students", Conference "Quality in International Education - an academic perspective", Toowoomba, 6-8 February
• HARGREAVES, DJ, SCOTT, W and KIRKCALDIE, RK (1989): "Undergraduate education in tribology at QIT", World Engineering Education for Advancing Technology Conference, Sydney, 13-17 February; The Institution of Engineers Australia National Conference Publication No 89/1, pp 449-452
• LARACY, JW and HARGREAVES, DJ (1989): "A design course for thermofluids", World Engineering Education for Advancing Technology Conference, Sydney, 13-17 February; The Institution of Engineers Australia National Conference Publication No 89/1, pp 456-459

 

Top of Publications Section

 

Non-Refereed Conference Papers

• CAMPBELL D, BOLES W, MURRAY M, IYER M, HARGREAVES D AND KEIR A (2007): “Balancing Pedagogy and Student Experience in First-year Engineering Courses”, Third International CDIO Conference and Workshop and Collaborator Meeting, Boston, USA (in press)

 

Top of Publications Section

 

Discipline Research

Refereed Journals

• REDDY V, CHATTOPADHYAY G AND HARGREAVES DJ (2007): “Analysis of Lubrication Effectiveness for Different Rail Materials”, in process for International Journal of Tribology
• WILIEM L, HARGREAVES DJ, STAPELBERG RF AND YARLAGADDA PKDV (2007): “Development of real-time data filtering for SCADA system”, Journal of Achievement in Materials and Manufacturing Engineering Vol 21 No 2, April, pp 89-92
• CHATTOPADHYAY G, REDDY V, HARGREAVES DJ AND LARSSON-KRAIK PO (2007): “Modelling and Analysis of Rail Maintenance Cost”, International Journal of Production Economics, 105, pp 475-482
• GALE L, COLLER R, HARGREAVES DJ, HILLS B AND CRAWFORD R (2007): “The role of SAPL as a boundary lubricant in prosthetic joints”, Tribology International, 40 pp 601-606 (also available online, www.sciencedirect.com)
• HARGREAVES, DJ AND FILLON, M (2007): “Analysis of a tilting pad journal bearing to avoid pad fluttering”, Tribology International, 40 pp 607-612 (also available online, www.sciencedirect.com)
• HARGREAVES, DJ AND TANG, JCH (2006): “Assessing friction characteristics of liquid lubricants”, Tribotest Journal Vol 12 No 4, September, pp 309-319 (also available online http://dx.doi.org/10.1002/tt.27)
• RAUCCKYTE T, HARGREAVES DJ AND PAWLAK Z (2006): “Determination of heavy metals and volatile aromatic compounds in used engine oils and sludges”, Fuel, 85 pp 481-485 (also available online, www.sciencedirect.com)
• COLLER R, HARGREAVES DJ, HILLS BA AND CRAWFORD R (2004): “Is SAPL the boundary lubricant in prosthetic joints: friction testing and surface rinsings”, Australian Journal of Mechanical Engineering, Vol 1 No 2 pp 63-72
• MAJUMDAR BC, PAI R AND HARGREAVES DJ (2004): “Analysis of water-lubricated journal bearings with multiple axial grooves”, Proc Instn Mech Engnrs, Vol 218 Part J J Engineering Tribology, pp 135-146
• CHATTOPADHYAY G, REDDY V, HARGREAVES DJ AND LARSSON-KRAIK PO (2004): “Assessment of risks and cost benefit analysis of various lubrication strategies for rail tracks under various operating conditions”, Trobologia (Finnish Journal of Tribology), Vol 23 pp 32-40. ISSN 0780-2285
• HARGREAVES DJ, SINGERLING B AND PAI R (2002): “Laboratory evaluation of anti-fretting lubricants”, Tribotest Journal Vol 8 No 4, June, pp 313-327
• PAI R AND HARGREAVES DJ (2002): “Performance of environmentally-friendly hydraulic fluids and material wear in cavitating conditions”, Wear, Vol 252, pp 970-978
• HARGREAVES, DJ and SCOTT, W (2000): “QUT’s tribological contribution to environmental sustainability”, Trans IEAust Vol ME24 No 1, pp 81-86
• HARGREAVES, DJ and ARMATYS D (1999): “Performance of a microgrooved journal bearing under steady and dynamic loading”, Tribotest Vol 5 No 3 March, pp 277-286
• HARGREAVES, DJ and ELGEZAWY, AS (1998): "A new model for combined Couette and Poiseuille flow in the transverse groove of a plane inclined slider bearing", Tribology International, Vol 31 No 6 pp 297-303
• HARGREAVES DJ and ELGEWAZY AS (1998):“An experimental study to evaluate the performance of three-groove and six-groove water-lubricated non-metallic journal bearings”, Trans Mech Eng (IEAust), Vol ME22, Nos 3&4, pp 93-100
• HARGREAVES, DJ and DUNN, M (1995):"Development of a reciprocating wear test rig and computer program for tribological studies of piston ring-liner contact", Trans IEAust, Vol ME 20 No 2
• HARGREAVES, DJ (1995):"Predicted performance of a tri-taper journal bearing including inertia and misalignment effects", Proc Instn Mech Engineers, Jnl Engineering Tribology, Vol 209, pp 85-97
• HARGREAVES, DJ and ELGEZAWY, AS (1993) ”Optimisation of grooving arrangement of a water lubricated journal bearing", Trans of IEAust, Vol ME18, No 3, pp 245 – 251
• HARGREAVES DJ (1991): “The Influence of Lubricant Operating Conditions on the Stability of Rotors”, Trans The Institution of Engineers Australia, Vol ME16, No 4, pp 231-235
• HARGREAVES DJ and SCOTT W (1991):”The Role of Tribology in Achieving Reliability”, Trans The Institution of Engineers Australia, Vol ME16, No 3, pp 221-224
• HARGREAVES DJ, SPERO C, KIRKCALDIE RK and FLITT H (1991): “Review of Test methods for Abrasive Wear in Ore Grinding”, Wear Vol 146, pp 389-408
• HARGREAVES DJ (1991): Surface waviness Effects on the Load carrying Capacity of Rectangular Slider Bearings”, Wear, Vol 145, pp 137-151
• HARGREAVES DJ (1990): “Engine Dynamometer Studies of Potential Component Wear in Vehicles using Unleaded gasoline”, Trans The Institution of Engineers Australia, Vol ME15, No 3, pp 196-200
• HARGREAVES DJ and TAYLOR CM (1987): “An Experimental Study of Oil-Air Interface Instability in a Grooved Rectangular Pad Thrust Bearing”, in Fluid Film Lubrication – Osborne Reynolds Centenary edited by Dowson, Taylor, Godet and Berthe, Elsevier Science Publishers, Amsterdam
• HARGREAVES DJ and TAYLOR CM (1984): “An Experimental and Theoretical Study of Lubricant Flow Rate in Grooved Rectangular Thrust Bearings”, Proc Instn mechanical Engineers, Part C, Vol 8, No 198, pp 225-233
• HARGREAVES DJ and TAYLOR CM (1982): “An Experimental and theoretical Study of Lubricant Flow rate in Static Grooved Rectangular thrust Bearings”, Journal of Mechanical engineering Science, Vol 24, No 1
• HARGREAVES DJ and TAYLOR CM (1982): “Research Note The Determination of Lubricant Flow Rate from a Static Grooved Rectangular Thrust Bearing using a Stream Function Analysis”, Journal of Mechanical Engineering Science, Vol 24, No 1
• SEEDHOM BB and HARGREAVES DJ (1980): “Partial or Total meniscectomy for the Bucket-handle Tear?”, Medisport, Vol 2, No 5, pp133-135
• SEEDHOM BB and HARGREAVES DJ (1979): “Transmission of the Load in the Knee Joint with Special reference to the Role of the Meniscii – Part II”, Engineering in Medicine Vol 8, No 4, pp 220-228
• SEEDHOM BB AND HARGREAVES DJ, (1979): “On the Bucket-handle Tear – Partial or Total Meniscectomy? A Quantitative Study”, Journal of Bone and Joint Surgery, Vol 61 B p 381

 

Top of Publications Section

 

Refereed Conference Papers

• REDDY V, CHATTOPADHYAY G AND HARGREAVES DJ (2007): “Modelling & Analysis of Operational Risks due to Rail Defects”, in process for IEEE Transactions on Reliability
• REDDY V, CHATTOPADHYAY G AND HARGREAVES DJ (2007): “Rail-Wheel Lubrication: An Overview”, in process for International Journal of Wear
• PAWLAK Z, KOSSE V, OLOYEDE A, RAUCKYTE T, KOPKOWSKI A, HARGREAVES DJ, PAI R AND MACINTOSH D (2006): “The antiwear effectiveness of Micellar Zinc Phosphates and Copper Oxide through friction-induced cross-linking”, AUSTRIB 2006: International Tribology Conference, Brisbane, Australia
• PAI RS, PAI R, MAJUMDAR BC AND HARGREAVES DJ (2006): “Comparison of static performance characteristics of 3-axial groove water lubricated journal bearing: Reynolds and JFO models”, AUSTRIB 2006: International Tribology Conference, Brisbane, Australia
• HARGREAVES DJ AND PALANITZ A (2006): “A review of the Wire on Capstan Apparatus”, AUSTRIB 2006: International Tribology Conference, Brisbane, Australia
• WILSON L, HARGREAVES DJ, CLEGG RE AND POWELL J (2006): “Modifications of a Rail/Wheel Wear Simulator to Measure Rail Curve Lubricant Performance”, AUSTRIB 2006: International Tribology Conference, Brisbane, Australia
• REDDY V, CHATTOPADHYAY G AND HARGREAVES DJ (2006): “Analysis of Rail Wear Data for Evaluation of Lubrication Performance”, AUSTRIB 2006: International Tribology Conference, Brisbane, Australia
• CHATTOPADHYAY G, REDDY V AND HARGREAVES DJ (2006): “Development of Framework for Benchmarking Rail-Wheel Lubrication”, AUSTRIB 2006: International Tribology Conference, Brisbane, Australia
• REDDY V, CHATTOPADHYAY G, HARGREAVES DJ AND LARSSON-KRAIK PO (2006): “Techniques in Developing Economic Decision Model Combining Above Rail and Below Rail Assets”, 1st World Congress on Engineering Asset Management (WCEAM 2006), Gold Coast, Australia, paper 58, ISBN 1846285836
• REDDY V, CHATTOPADHYAY G, HARGREAVES DJ AND LARSSON-KRAIK PO (2006): “Development of Wear-Fatigue-Lubrication-Interaction Model for Cost Effective Rail Maintenance Decisions”, 1st World Congress on Engineering Asset Management (WCEAM 2006), Gold Coast, Australia, paper 59, ISBN 1846285836
• REDDY V, CHATTOPADHYAY G, LARSSON-KRAIK PO AND HARGREAVES DJ (2006): “Analysis of field data to develop rail wear prediction model”, 19th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2006), Lulea, Sweden, pp595-604, ISBN 9789163188060
• CHATTOPADHYAY G, REDDY V, LARSSON-KRAIK PO AND HARGREAVES DJ (2006): “Rail-wheel lubrication practice: framework for lubrication effectiveness”, 19th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2006), Lulea, Sweden, pp595-604, ISBN 9789163188060
• REDDY V, CHATTOPADHYAY G, HARGREAVES DJ AND LARSSON-KRAIK PO (2005): “Analysis of Lubrication Effectiveness for Different Rail Materials”, International conference on Operations Research Applications in Infrastructure Development in conjunctions with the 2005 annual convention of Operational Research Society of India (ORSI), Bangalore, India
• LARSON-KRAIK PO, CHATTOPADHYAY G, POWELL J, WHEATLEY N, HARGREAVES DJ AND REDDY V (2005): “Rail-Wheel Lubrication: A Conceptual Decision Model”, International conference on Operations Research Applications in Infrastructure Development in conjunctions with the 2005 annual convention of Operational Research Society of India (ORSI), Bangalore, India
• LARSSON-KRAIK PO, CHATTOPADHYAY G, REDDY V AND HARGREAVES DJ (2005): “Effectiveness of Rail-Wheel Lubrication in practice”, Proc 18th International Congress Comadem2005, Cranfield, UK, pp 453-462. ISBN 1871315913
• PAWLAK Z, HARGREAVES DJ, RAUCKYTE T, ZAK S AND PAI R (2005): “Macrocyclic compounds in lubricant formulation”, IV International conference on Tribochemistry, Cracow, Poland, 3-5 October
• PAWLAK Z, HARGREAVES DJ, RAUCKYTE T, ZAK S AND PAI R (2005): “Micellar lubrication: hard core reverse micelles in process of tribofilms formation and acid-base interactions in lubricant formulation”, IV International conference on Tribochemistry, Cracow, Poland, 3-5 October
• RAUCKYTE T, HARGREAVES DJ AND PAWLAK Z (2005): “Assessment of sediment impact on groundwater quality in the Park City Mine, Utah”, Conference ECOpole’05, Jamrozowa Polana k.Dusznik Zdroj, 20-23 October
• PAWLAK Z, YARLAGADDA PKDV, HARGREAVES DJ AND KOSSE V (2005): “Temperature and pressure-induced coordination changes of transition metals in surface layers”, 11th International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Material Science, CAMS 2005, Gliwice-Zakopane, 6-9 December
• HARGREAVES DJ AND FATCHUDIN E (2005): “Grease Stability under vibrating conditions”, International Tribology Conference, Kobe, Japan, 29 May – 2 June 2005
• HARGREAVES DJ AND TANG JCH (2005): “Assessing friction characteristics of liquid lubricants”, International Tribology Conference, Kobe, Japan, 29 May – 2 June 2005
• SWAROOP CR, BROWN RJ AND HARGREAVES DJ (2005): “Effect on pH and COD by emissions to water from 2-stroke and 4-stroke outboard engines using mineral lubricants”, International Tribology Conference, Kobe, Japan, 29 May – 2 June, 2005
• SHARMA S, HARGREAVES DJ AND SCOTT W (2004): “Errors in measuring the radial clearance of journal bearing and implications for bearing performance”, 1st International Conference on Advanced Tribology, 1-3 December, 2004, Singapore
• HARGREAVES DJ (2004): “Does tribology have a social conscience?”, 1st International Conference on Advanced Tribology, 1-3 December, 2004, Singapore
• SWAROOP CR, BROWN RJ, KELLY CA AND HARGREAVES DJ (2004): “Effect on water quality by emissions from 2-stroke outboard engines when using both mineral lubricant and environmentally adaptive lubricant (EAL)”, 1st International Conference on Advanced Tribology, 1-3 December, 2004, Singapore
• PAI RS, PAI R AND HARGREAVES DJ (2004): “Static and dynamic characteristics of 3-axial groove water lubricated journal bearing”, Proc Conference, Mumbai, India, 15-18 Dec, pp 354-361
• RICHERT, M., RAUCKYTE, T, HARGREAVES, DJ. PAWLAK, Z (2004): “The Toxicity Characteristics Leaching Procedure (TCLP) extraction in evaluation of heavy metals and total organic volatile contaminants in used engine oil and sludges”, XIX International Symposium on Phyico-Chemical Methods of the Mixtures Separation, “ARS SEPARATORIA 2004”, June 10-13, 2004, Poland
• WANG J, CHATTOPADHYAY G AND HARGREAVES DJ (2004): “Development of a postgraduate course in engineering management (EM) for meeting the market demand within Australia and Asia-Pacific region”, IEMC 2004, 18-21 October, Singapore
• CHATTOPADHYAY G, REDDY V AND HARGREAVES D. (2004): “Assessment of risks and cost benefit analysis of various lubrication strategies for rail tracks under different operating conditions”, ACSIM Conference, Delhi, India, 6-9 December 2004
• CHATTOPADHYAY G, REDDY V, HARGREAVES DJ AND LARSSON-KRAIK PO (2004): “Integrated Rail and Wheel Maintenance Model for Cost sharing by Rail Players”, VETOMAC-3 & ACSIM-2004 Conference, Delhi, India, 6-9 December 2004
• MATHEW A, ZHANG S, MA L, EARLE T, AND HARGREAVES D. (2004): “Reducing maintenance cost through effective prediction analysis and process integration”, ACSIM Conference, Delhi, India, December, 2004
• CHATTOPADHYAY G, REDDY V, HARGREAVES DJ AND LARSSON-KRAIK PO (2004): “Comparative evaluation of various rail-wheel lubrication strategies”, COMADEM 2004, Cambridge, United Kingdom, pp52-61, ISBN 0954130715
• PAWLAK Z AND HARGREAVES DJ (2004): “Micellar lubrication interaction of soft-core reverse micelles with oil additives and engine surfaces”, Proc XIX International Symposium on Physico-Chemical Methods of the Mixtures Separation, June 10-13, 2004 Poland, pp122-127
• RAUCKYTE T, HARGREAVES DJ, AND PAWLAK Z (2004): “The toxicity characteristics leaching procedure (TCLP) extraction in evaluation of heavy metal and total organic volatile contaminants in used engine oil and sludges”, ”, Proc XIX International Symposium on Physico-Chemical Methods of the Mixtures Separation, June 10-13, 2004 Poland, pp250-257
• PAI RS, PAI R, MAJUMDAR BC AND HARGREAVES DJ (2003): “Effect of groove angles on the static characteristics of multiple axial groove water lubricated bearings”, XII National Conference of Indian Society of Mechanical Engineers, December, Roorkee India, paper no MD-037
• CHATTOPADHYAY G, REDDY V, LARSSON PO AND HARGREAVES DJ (2003): “Development of optimal rail track maintenance strategies based on rolling contact fatigue (RCF), traffic wear, lubrication and weather conditions”, Proc 5th Operations Research Conference of Australian Society, 9-10 May, Sunshine Coast, Australia, pp 54-66
• PAI R, BROWN R AND HARGREAVES DH (2002): “Modelling of fluid flow in a 3-axial groove water bearing using computational fluid dynamics”, Proc 14th Australasian Fluid Mechanics Conference, Vol 1, Adelaide, Australia pp 331-334
• PAI R AND HARGREAVES DJ (2002): “Evaluation of low sulphur diesel fuel with lubricity additive using a high frequency reciprocating rig”, Proc 3rd Australasian Congress on Applied Mechanics (ACAM), February, Sydney, pp 593-598
• HARGREAVES DJ AND PAI R (2002): “The effect of effective viscosity of grease on the elastohydrodynamic film thickness”, Proc 24th Aust Soc Sugar Cane Technol, Vol 24, Cairns
• HARGREAVES DJ AND PAI R (2002): “Investigations of the influence of friction modifiers on the performance of lubricating oils under different operating conditions”, Proc Aust Soc Sugar Cane Technol, Vol 24, Cairns
• HARGREAVES DJ AND PAI R (2002): “Shear stability of a viscosity index improved oil in EHL contact”, Proc International Tribology Conference (Austrib 2002), Perth, December, pp 435-440
• PAI R AND HARGREAVES DJ (2002): “Analysis of bearing failure in radial piston pumps”, Proc International Tribology Conference (Austrib2002), Perth, December, pp 543-548
• HARGREAVES DJ AND PAI R (2002): “Modelling of fluid flow in the grooves of a 3-axial groove water bearing using computational fluid dynamics”, Proc International Tribology Conference (Austrib2002), Perth, December, pp 407-411
• KELLY C, BROWN R, REA D, SCOTT W AND HARGREAVES DJ (2001): “Comparison of mineral and biodegradable lubricants for two-stroke outboard motors”, Proc 2nd World Tribology Congress, Vienna, Austria, 3-7 September
• HARGREAVES DJ AND SHARMA SC (2001): “Effects of solid contaminants on journal bearing performance”, Proc 2nd World Tribology Congress, Vienna, Austria, 3-7 September
• KELLY C, BROWN R, REA D, SCOTT W AND HARGREAVES DJ (2001): “Comparison of mineral and biodegradable lubricants for two-stroke outboard motors”, Proc 2nd World Tribology Congress, Vienna, Austria, 3-7 September
• HARGREAVES DJ AND CHADWICK G (2000): “Experimental and theoretical analyses of combined Couette and Poiseuille flows in journal bearings with multiple axial grooves”, International Conference on Tribology, Nagasaki, Japan, October, 2000
• MCGREGOR P AND HARGREAVES DJ (2000): “Performance evaluation of environmentally friendly hydraulic fluids”, International Conference on Tribology, Nagasaki, Japan, October, 2000
• HARGREAVES, DJ and SCOTT, W: The influence of surface topography on the frictional characteristics of piston ring-cylinder liner contact”, Austrib’98 conference, Brisbane, Dec, pp 99-104
• HARGREAVES, DJ and SCOTT, W: “Measurement of pressure in the lubricant film under a slider pad for both stationary and moving conditions”, ”, Austrib’98 conference, Brisbane, Dec, pp 281-286
• HARGREAVES, DJ and SCOTT, W: “QUT’s tribological contribution to environmental sustainability”, Austrib’98 conference, Brisbane, Dec, pp 617-722
• HARGREAVES DJ and SCOTT W (1997): “Performance of microgrooved journal bearings under steady and dynamic loading”, World Tribology Congress, Sept, London, p 403
• HARGREAVES DJ and SCOTT W (1997): “Pressure distribution due to squeeze effects in plain slider bearings”, World Tribology Congress, Sept, London, p 404
• HARGREAVES DJ and SCOTT W (1997): “Specifying surface roughness for spur and helical gears”, Leeds/Lyons Symposium, London, Sept
• HARGREAVES DJ, SCOTT W and BEACH JS (1995): “Flow requirements for synchronously loaded plain journal bearings”, Proc International Tribology Conference, Vol 3, pp 1243-1248
• HARGREAVES, DJ and ELGEZAWY, AS (1994): "An experimental study of pressure jumps at the leading edge and across a transverse groove in an inclined slider thrust bearing" Proceedings of the 4th International Tribology Conference, AUSTRIB’94, Perth, December, Vol II, pp 733-740
• HARGREAVES, DJ and ELGEZAWY, AS (1994): "An experimental and theoretical study to optimise the performance of a three-groove water lubricated non-metallic journal bearing" Proceedings of the 4th International Tribology Conference, AUSTRIB’94, Perth, December, Vol II, pp 725-732
• HARGREAVES, DJ and DUNN, M (1994): "Development of a reciprocating wear test rig and computer program for tribological studies of piston ring-liner contact" Proceedings of the 4th International Tribology Conference, AUSTRIB '94, Perth, December, Vol II, pp 545-551
• HARGREAVES, DJ and WALLIS, EJ (1993): "The students' approach to learning and its relationship to the learning context", 5th AaeE Conference, pp 542-547, Auckland, December
• HARGREAVES, DJ and SCOTT, W (1993): "Heat balance of multi-reduction gear boxes", 5th Australasian Heat and Mass Transfer Conference, Brisbane, December
• HARGREAVES, DJ, KIRKCALDIE, RK, SCOTT, W (1993): "Performance assessment of rotary shaft seals", Bulk Materials Handling Conference, September, Yeppoon. The Institution of Engineers, Australia, National Conference Publication No 93/8, pp 129-133
• HARGREAVES DJ and REID B (1992): “Steady State performance of a Tri-taper Journal Bearing”, 11th Australasian Fluid Mechanics Conference, Hobart, December
• HARGREAVES DJ, SPERO C, KIRKCALDIE RK and FLITT H (1992): “Laboratory Simulation of Abrasive-corrosive Wear in Coal Grinding”, Australian Corrosion Association Annual Conference, December, Hobart
• HARGREAVES DJ (1991): ‘An Introduction in Piston-ring Lubrication”, The Institution of Engineers Australia Qld Division Technical papers, Vol 32, No 17, pp 7-13
• HARGREAVES DJ and SCOTT W (1991): “A Case for Reclaimed Lubricating Oils”, International Mechanical Engineering Conference, Sydney, The Institution of Engineers Australia National Conference publication No 91/100, pp 138-141
• HARGREAVES DJ and SPRENGEL J (1990): “A Test Rig for the Performance Assessment of Non-metallic water Lubricated Bearings”, International Tribology Conference, Brisbane, The Institution of Engineers Australia National Conference publication No 90/14, pp 91-96
• HARGREAVES DH and SCHMIEDE T (1990): “Fuel Injector Fouling of Leaded and Unleaded Engines”, International Tribology Conference, Brisbane, The Institution of Engineers Australia National Conference Publication No 90/14, pp 177-180
• HARGREAVES DJ, SCOTT W and HOWITT K (1990): “Lubrication – Facts, Myths and Mysteries”, The Institution of Engineers Australia Mechanical College Technical report, August
• HARGREAVES DJ and SCOTT W (1990): “Specifying Surface Roughness for Spur and Helical Gears”, 5th International conference on Manufacturing Engineering, Woollongong, July, The Institution of Engineers Australia National Conference publication No 90/5, pp 419-424
• HARGREAVES DJ and SCOTT W (1989): “The Lubrication of Wire Ropes”, Third International Conference on Bulk Materials, Storage, Handling and Transportation”, Newcastle, June, The Institution of Engineers Australia National Conference Publication No 89/9, pp 187-191
• HARGREAVES DJ and SCOTT W (1989): “The Role of Tribology in Achieving Reliability”, Third International Conference on Bulk Materials, Storage, Handling and Transportation, Newcastle, June, The Institution of Engineers Australia National Conference Publication No 89/9, pp192-195
• HARGREAVES DJ (1989): “Development of a Test Technique to Evaluate Mill Brass Lubricant Performance”, Proc Australian Society for Sugar Cane Technologists, Tweed Heads, May, pp 220-225
• HARGREAVES DJ, SCOTT W and HOWITT K (1989):”Lubrication – Facts and Myths”, The Institution of Engineers Australia, Qld Division Technical Papers, April
• HARGREAVES DJ (1988): “The Influence of Lubricant Operating Conditions on the stability of Rotors”, Mech88 Conference, Brisbane, The Institution of Engineers Australia National Conference publication No 88/6, pp37-41
• HARGREAVES DJ and SCOTT W (1987): ”The Effect of Lubricant Film Geometry on the Load Carrying Capacity of Slider Bearings”, International Tribology Conference, Melbourne, December, The Institution of Engineers Australia National Conference Publication No 87/18 pp 164-167
• HARGREAVES DJ (1987): “Engine dynamometer studies of Potential Component wear in Vehicles using Unleaded Gasoline”, International Tribology Conference, Melbourne, December, The Institution of Engineers Australia National Conference Publication No 87/18 pp 231-235
• HARGREAVES DJ and TAYLOR CM (1987): “The Influence of Lubricant Re-circulation on Lubricant Film Extent and Flow Rate in Grooved Rectangular Pad Slider Bearings”, International Tribology Conference, Melbourne, December, The Institution of Engineers Australia National Conference Publication No 87/18 pp 217-222
• HARGREAVES DJ (1984): “The Lubrication of Mill brasses”, Proc Australian Society for Sugar Cane Technologists, Cairns Conference pp 191-197

 

Top of Publications Section

 

Invited Presentations

• “The Effect of Honing on the Frictional Resistance of Cylinder Liners”, to Society of Manufacturing Engineers (SME) biannual conference “International Honing”, Atlanta, Georgia
• “The Influence of Lubrication on Maintenance Costs in the Sugar Industry”, to Caltex Symposium for Sugar Industry, Thailand, 2001
• “The role and potential of young engineers in the profession”, to Young Engineers (Queensland Division) Symposium, August, 2001

 

Top of Publications Section

 

Papers Presently Being Reviewed/Accepted for Journal or Conference Publication

• CHATTOPADHYAY G, REDDY V, HARGREAVES DJ AND LARSSON-KRAIK PO (2005): “Decision on economical Rail Grinding interval for controlling Rolling Contact fatigue (RCF)”, accepted for publication in International Transactions of Operational Research
• HARGREAVES DJ AND PLANITZ A (2005): “Assessing the Energy Efficiency of Gear Oils via the FZG Test machine”, submitted to Tribology International

 

Top of Publications Section

 

Internal and/or Confidential Reports (not including Consulting Reports)

• HARGREAVES, DJ (1995): “Assessment of the performances of non-metallic bearings in a variety of environments”, for Australian Electrical Supply and Industrial Research Board
• HARGREAVES, DJ (1994): "Graduate Reflections of the Mechanical Engineering Degree at QUT", School of Mechanical and Manufacturing Engineering, ISBN 1 86435 636 7
• HARGREAVES, DJ (1994): “Graduate and Student Comments on the ME45 degree course”, School of Mechanical and Manufacturing Engineering, ISBN 1 86435 637 5

 

Top of Publications Section

 

Guest Editorships of Journals

• Hargreaves DJ, Scott W and Stachowiak G (2000): Wear Vol 241, No 2
• Hargreaves DJ, Scott W and Stachowiak G (2000): Tribology International, Vol 33, No 3-4
• Hargreaves DJ (2000): Trans Mechanical Engineering, Vol ME24, No 1
• Hargreaves DJ (2000): Australasian Journal of Engineering Education

 

Top of Publications Section

 

Non-Refereed Conference/Magazine Papers

• HARGREAVES DJ AND EVANS P (2007): “Leadership Driven By Values”, Engineering Australia Magazine, April 2007, pp 71-72
• HARGREAVES DJ AND EVANS P (2006): “Values Driven Leadership”, Engineering Leadership Conference 2006 – Engineering For Today And Tomorrow, Melbourne, August 2006
• RANJAN V, PAI R AND HARGREAVES DJ (2006): “Stiffness and damping coefficients of 3-axial groove water lubricated bearing using perturbation technique”, Futurescope, Q1-Q6
• HARGREAVES DJ AND FILLON M (2004): “Analysis of a tilting pad journal bearing to avoid pad fluttering”, Proc 11th Nordtrib conference, Tromso, Norway, 1-5 June, pp 157-166
• CHATTOPADHYAY G, REDDY V, LARSSON-KRAIK PO AND HARGREAVES DJ (2004): “Assessment of risks and cost benefit analysis of various lubrication strategies for rail tracks under different operating conditions”, Proc 11th Nordtrib conference, Tromso, Norway, pp 289-296
• HARGREAVES DJ, PAI AND MUNN R (2004): “Small design change to thrust bearing significantly reduces maintenance costs”, Proc 11th Nordtrib conference, Tromso, Norway, pp 625
• COLLER R, GALE L, HARGREAVES DJ AND CRAWFORD R (2004): “The role of SAPL as a boundary lubricant in prosthetic joints”, Proc 11th Nordtrib conference, Tromso, Norway
• WILSON L, HARGREAVES DJ AND CLEGG RE (2004): “An experimental device to assess the performance of wheel/rail lubricants”, Proc 11th Nordtrib conference, Tromso, Norway
• SMEAL G, KERR C, ASPLAND T, HARGREAVES DJ AND CREASY S (2003): “Blurring the boundaries between academic and general staff”, ATEM Queensland Branch conference

 

Top of Publications Section

 

Peer Reviewer for Papers

Numerous papers have been reviewed for the journals of Tribotest, Wear, Tribology International, Engineering in Medicine, Australian Journal of Mechanical Engineering as well as conferences such as Austrib90, Austrib94, Austrib98, Austrib2002, Australasian Association for Engineering Education (AaeE) conferences from 1998 to 2003.

 

Top of Publications Section